Our Roofing Services | Mount Lemmon, AZ
Mount Lemmon Roofing & Maintenance handles every roofing job from a single-shingle repair to a full commercial re-roof. Here's what we do in Mount Lemmon.
Roof Replacement
The average roof replacement in Mount Lemmon takes one day for a standard residential home. Larger or steeper roofs might take two. Either way, we don't leave a house uncovered overnight. If we tear it off, we cover it before we leave. No exceptions.
Get a Free Quote →Roof Repair
Improper step flashing is the leading cause of roof leaks at wall-to-roof transitions. Step flashing needs to be woven between shingle courses with each piece extending 4" above the shingle exposure. We see Mount Lemmon homes where the last roofer used continuous L-flashing or just caulked the gap. That always fails. We tear it out and install proper step flashing with a kick-out diverter at the bottom per IRC R905.2.8.3.
Get a Free Quote →Storm Damage Repair
HAAG Certified Inspectors on staff for every storm damage assessment. We document per HAAG residential guidelines: hail hit density per test square, severity classification, functional vs. cosmetic damage distinction. Insurance adjusters trust HAAG methodology because it's the industry standard. Our supplementation process references FM 4473 hail ratings and manufacturer impact resistance specs when fighting for full replacement approval.
Get a Free Quote →New Roof Installation
We handle new construction from permits through final inspection. Our Mount Lemmon office coordinates with your builder on scheduling, material delivery, and inspection timing. Typical install time is 1-3 days depending on size and complexity.
Get a Free Quote →Metal Roofing
Metal roof repairs are usually sealant failures at transitions, loose panels from improper installation, or rust spots on older galvanized systems. Our Mount Lemmon crew repairs all metal types. Not every issue needs a full replacement. Sometimes a sealant touch-up or panel re-securing solves it.
Get a Free Quote →Shingle Roofing
CertainTeed Landmark PRO with NailTrak technology and Max Def color blends. Dimensional color depth that mimics natural cedar. Algae-resistant with StreakFighter technology. Class A fire rating, ASTM D3462 compliant, rated to 110 mph per ASTM D3161 Class F (Landmark PRO IR rated to 130 mph). 5-Star SureStart Plus warranty when installed by CertainTeed SELECT ShingleMaster. That's us. The warranty covers 100% of material and labor costs for 20 years with declining coverage for 30 more.
Get a Free Quote →Flat Roofing
Flat roof leak detection in Mount Lemmon: we start with a visual inspection of seams, flashings, and penetrations. If the leak source isn't obvious, we use electronic leak detection (ELD) or flood testing on membrane roofs. We find it and fix it. No guessing, no unnecessary tear-offs.
Get a Free Quote →Commercial Roofing
Multi-family properties in Mount Lemmon need roofing contractors who understand occupied buildings. We schedule around tenants, contain debris, and minimize noise during reasonable hours. Emergency leak repairs get priority. Water in someone's apartment is an emergency.
Get a Free Quote →Gutter Installation
We hang gutters with hidden hangers screwed into the rafter tails or fascia board every 24 inches max. No spike-and-ferrule, no exposed hardware. Proper pitch is 1/4" per 10 feet toward each downspout. Too flat and water sits. Too steep and it looks wrong.
Get a Free Quote →Roof Inspection
Buying or selling a home in Mount Lemmon? A roof inspection from a licensed contractor beats whatever the home inspector saw from the driveway. We check every component, give you a remaining-life estimate, and flag anything the buyer or seller should know about.
Get a Free Quote →Emergency Roof Repair
When a tree goes through your roof at 2 AM, you need someone who answers the phone and shows up with a truck full of materials. Call (877) 349-1553. We handle roofing emergencies in Mount Lemmon 7 days a week, including holidays.
Get a Free Quote →Skylight Installation
VELUX FS (fixed) and VS (vented) skylights installed with EDL flashing kits for shingle roofs. The multi-step flashing integrates with the surrounding shingle courses per IRC R903.2. We frame the curb with doubled 2x8 or 2x10 lumber (depending on rafter depth), install ice and water shield membrane around the entire curb perimeter, then set the skylight with factory sealant before weaving step flashing into the field. Top headwall flashing tucks under the upslope shingle course. Bottom sill pan diverts water onto the downslope shingles. Zero exposed sealant joints. Mechanical flashing only.
Get a Free Quote →